HIKVISION DS-KB8113-IME1 Series - Intercom ‰‰〷呠N

2.
Select the Major Type as Device Event or Door Event.
3.
Select the Minor Type.
-
For device event, the Minor Type is set as Tampering Alaem by default.
-
For door event, select Minor Type as Door Open Timed Out (Door Contact).
4.
Select the type of the Normal Linkage for the event.
5.
Click Save to enable the 
7.4.7 Intercom 
Device No. 
Set the No. of the device, and linked devices can build a 
Steps
1.
Click Intercom → Device No. to enter the  page.
2.
Select the device type from the drop-down list, and set the corresponding 
3.
Select the device type from the drop-down list, and set the corresponding  including
Floor No., Door  No., Building No., Community No. and Unit No.
Note
When you select Doorphone as Device Type, only Community No., Building No. and Unit No.
can be set.
4.
Click Save to enable the device number 
Note
●
For main door  (D series or V series), the serial No. is 0.
●
For sub door  (D series or V series), the serial No. cannot be 0. Serial No. ranges from 1
to 99.
●
For each villa or building, at least one main door  (D series or V series) should be
 and one sub door  (D series or V series) can be customized.
●
For one main door  (D series or V series), up to 8 sub door  can be 
Session 
Steps
1.
Click Intercom → Session  to enter the  page.
DS-KB8113-IME1(B) Series Vandal-Resistant Door  User Manual
42