Figure 7-14 Session
2.
Set Password.
3.
Set Main IP and Private Server IP.
4.
Slide to enable Protocol 1.0.
5.
Click Save to enable the
Call
Go to Intercom → Call to enter the page.
Max. Call , Max. Message and Max. Ring , and click
Save.
Note
●
Max. call between the module indoor and client ranges from 90 s to 120 s. The
call will end when the actual calling is longer than the one.
●
Max. message ranges from 30 s to 60 s. The message will end when the
actual message is longer than the one.
●
Max. ring ranges from 65 s to 255 s.
Ring-Back Tone
Click Intercom → Ringbacktone to enter the page.
Click Add to select the ring tone from PC.
Note
Available Audio Format: WAV、AAC, Size: Less than 600 KB, Sample Rate: 8000Hz, Mono.
DS-KB8113-IME1(B) Series Vandal-Resistant Door User Manual
43