Alarm
On the Live View page, tap ... → → , slide the slider to enable alarm
Tap Draw Area and select area. Tap to save.
Figure 6-2 Draw Area
Tap to adjust the
Note
When is triggered, the device can capture the picture and upload to the
as an event.
Volume
On the Live View page, tap ... → , you can adjust the Loudspeaker Volume and
Microphone Volume.
Note
Loudspeaker volume and microphone volume can be set from 0 to 10.
On the home page of the client, tap to get or edit alarm messages.
DS-KB8113-IME1(B) Series Vandal-Resistant Door User Manual
20