HIKVISION DS-KB8113-IME1 Series - Page 37

DST
Click System  → DST to check Enable DST. Set the parameters according to your needs and
click Save to enable the 
About
Click System  → About and click Open Source  Licenses to view the details.
Maintenance
Click Maintenance → Upgrade & Maintenance to enter the  page.
●
Reboot: Click Reboot to reboot the device.
●
Default
Click Default to reset all the parameters, except the IP parameters and user  to
the default 
Restore All
Click Restore All to restore all parameters to default 
●
Unlink APP Account: Click Unlink APP Account to unlink the APP account of the device.
●
Export parameters:
1. Select Device Parameters, and click Export to pop up the dialog box.
2. Set and  the  password.
3. Click OK to export parameters.
●
Import  File:
1. Click browse icon to select the  
2. Click Import and enter the  password to import.
●
Upgrade: Click browse icon to select the upgrade 
Note
The upgrading process will last 1 to 10 minutes, do not power  during the upgrading. The
device reboots   upgrading.
Security Service
Click Security → Security Service to enter the  page. On the page, you can enable SSH
according to your actual needs.
Click Save to enable the 
User Management
Click User Management to enter the  page.
Administrator can edit the permission for the users.
DS-KB8113-IME1(B) Series Vandal-Resistant Door  User Manual
26