Video Intercom Indoor Station·User Manual
84
Figure 9-26 SCP Adding Interface
5. Enter the IP address and port No. of the security control panel.
6. Press the tab on the upper left corner of the dialogue box.
Indoor extension does not support connecting to the security control panel.
Synchronizing Time
Steps:
1. Press the Settings tab on the touch screen.
2. Press the Configuration tab and enter the admin password (configuration password).
3. Press the Sycn Time tab to enter the time synchronizing interface.
Figure 9-27 Time Synchronizing Interface
4. Switch to to enable NTP.
5. Set the synchronizing interval.
6. Enter the IP address of NTP server, and Port No.
7. Select the time zone.
The default unit of synchronizing interval is minute.
The default port No. is 123.
To Next Page
Loading...
