Video Intercom Indoor Station·Quick Start Guide
25
Figure 5-11 Device Selecting Interface (Indoor Station)
4. Press the IP Camera tab to pop up the IP camera adding dialogue box.
Figure 5-12 IP Camera Adding Interface
5. Enter the device name, IP address, Port No., user name, and password.
6. Press the tab to save the settings.
The default port No. is 554, and the default user name is admin.
When the IP camera is added successfully, you can get the live view of IP camera on
the live view interface.
The highest resolution of the IP camera added to the indoor station is 1280 x 720 @
30 fps, and the video compression standard of the IP camera should be H.264.
To Next Page
Loading...
