EasyManuals Logo

HIKVISION DS-KH8301-WT Quick Start Guide

HIKVISION DS-KH8301-WT
42 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #32 background imageLoading...
Page #32 background image
Video Intercom Indoor Station·Quick Start Guide
24
Figure 5-10 Main Door Station Adding Interface (Indoor Station)
4. Select the main door station type: D Series, or V Series.
5. Enter the IP address of the main door station, and press the tab to save the
settings.
Adding IP Camera
Steps:
1. Get to the configuration interface: Settings > Configuration, and enter the admin
password (configuration password).
2. Press the Device tab to enter the device management interface.
3. Press the Add Device tab.

Other manuals for HIKVISION DS-KH8301-WT

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HIKVISION DS-KH8301-WT and is the answer not in the manual?

HIKVISION DS-KH8301-WT Specifications

General IconGeneral
ColorYes
Video codecsH.264
CertificationFCC, IC, CE, C-TICK, ROHS, REACH, WEEE
Connectivity technologyWired
Sustainability certificatesRoHS
Voice codecsG.711u
Display diagonal7 \
Touchscreen typeCapacitive
Display resolution1024 x 600 pixels
Display technologyLCD/TFT
Proper useIndoor
Control typeTouch
Product colorWhite
Cabling technology10/100Base-T(X)
Ethernet LAN data rates10, 100 Mbit/s
Ethernet interface typeFast Ethernet
Ethernet LAN (RJ-45) ports1
Supported network protocolsTCP/IP, RTSP
Outdoor unit includedNo
Operating system installedLinux
Operating relative humidity (H-H)10 - 90 %
Main monitor station operating temperature (T-T)-10 - 55 °C
Indoor unit power typeAC/DC
Power consumption (typical)10 W
Megapixel0.3 MP
Sensor typeCMOS
Maximum frame rate30 fps
Compatible memory cardsMicroSD (TransFlash)
Maximum memory card size32 GB
Weight and Dimensions IconWeight and Dimensions
Depth26 mm
Width217 mm
Height142 mm

Related product manuals