HIKVISION DS-KH8350-WTE1

Figure 4-19 Local Network Conguraon
2.
Enter the Local IP Address, IP Address Subnet Mask, Gateway, Port No. and HTTP Port No.
3.
Click Save to enable the sengs.
Note
●
The default port No. is 8000.
●
Aer eding the local network parameters of device, you should add the devices to the device
list again.
SIP Server Conguraon
Steps
1.
Click SIP Server Conguraon to enter the conguring the SIP parameters page.
Network Indoor Staon Conguraon Guide
61