EasyManuals Logo

HIKVISION DS-KH8350-WTE1 Configuration Guide

HIKVISION DS-KH8350-WTE1
82 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #80 background imageLoading...
Page #80 background image
Table A-1 Table A
Roung Path Twisted Pair :
24 AWG (0.2
mm
2
)
Twisted Pair :
20 AWG (0.5
mm
2
)
Twisted Pair :
18AWG (0.8
mm
2
)
Twisted Pair :
16AWG (1
mm
2
)
Parallel lines
(0.5 mm
2
to
0.8 mm
2
)
DS-KAD706-S-
DS-KAD706
Transmission
Distance ≤ 60
m
Transmission
Distance ≤ 60
m
Transmission
Distance ≤ 60
m
Transmission
Distance ≤ 50
m
Transmission
Distance ≤ 35
m
DS-KAD706-
DS-KAD706
Transmission
Distance ≤ 60
m
Transmission
Distance ≤ 60
m
Transmission
Distance ≤ 60
m
Transmission
Distance ≤ 50
m
Transmission
Distance ≤ 35
m
DS-KAD706-
DS-KD8003-
IME2
Transmission
Distance ≤ 35
m
Transmission
Distance ≤ 60
m
Transmission
Distance ≤ 60
m
Transmission
Distance ≤ 50
m
Transmission
Distance ≤ 35
m
DS-KAD706-
DS- KH6320-
WTE2
Transmission
Distance ≤ 35
m
Transmission
Distance ≤ 100
m
Transmission
Distance ≤ 100
m
Transmission
Distance ≤ 100
m
More
parameters in
Table B
Roung Path Parallel lines: 24
AWG (0.2 mm
2
)
Parallel lines: 20
AWG (0.5 mm
2
)
Parallel lines: 18
AWG (0.8 mm
2
)
Parallel lines: 16
AWG (1 mm
2
)
DS-KAD706- DS-
KH6320-WTE2
Transmission
Distance ≤ 50 m
Transmission
Distance ≤ 100 m
Transmission
Distance ≤ 100 m
Transmission
Distance ≤ 100 m
Device Installaon
Installaon environment (temperature, moisture etc.) need to follow requirements in
specicaon or power output can be eected.
Power consumpon of modular door staon (main module and sub modules) should be less
than 12W. Please reach local technical support if you are not sure about power consumpon of
each module. Door
staon should be connected to CH6 of the video/audio distributor. If
modular door staon is connected to any terminal of CH1 to CH5, up to 3 sub modules can be
connected.
Indoor
staon should be connected to any terminal of CH1 to CH5 of the video/audio distributor.
Up to 15 video/audio distributor can be cascaded. If more distributors are needed, you should
cascade network switch
supporng 1000 Mbps. The whole 2-wire system can have up to 500
devices.
Power supply must be
cered by Hikvision.
Indoor staon needs to use rmware released aer October, 2019.
Network Indoor Staon Conguraon Guide
71

Other manuals for HIKVISION DS-KH8350-WTE1

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HIKVISION DS-KH8350-WTE1 and is the answer not in the manual?

HIKVISION DS-KH8350-WTE1 Specifications

General IconGeneral
Product colorBlack
Package weight899 g
Indoor unit includedYes
Outdoor unit includedNo
Display diagonal7 \
Display resolution1024 x 600 pixels
Operating system installedLinux
Voice codecsG.711u
Number of speakers1
CertificationFCC, IC, CE, C-TICK, ROHS, REACH, WEEE, UL, CB, RCM
Connectivity technologyWired & Wireless
Maximum number of cameras supported-
Wi-Fi standards802.11b, 802.11g, Wi-Fi 4 (802.11n)
Networking standardsIEEE 802.3af
Ethernet LAN data rates10, 100 Mbit/s
Ethernet interface typeFast Ethernet
Supported network protocolsTCP/IP, SIP, RTSP
Compatible memory cardsMicroSD (TransFlash)
Maximum memory card size32 GB
Power consumption200 mA
Indoor unit power typeDC
Power consumption (typical)7 W
Operating relative humidity (H-H)10 - 90 %
Main monitor station operating temperature (T-T)-10 - 55 °C
Weight and Dimensions IconWeight and Dimensions
Weight355 g
Door station dimensions (WxDxH)180 x 140 x 22.4 mm

Related product manuals