Need help?Do you have a question about the HIKVISION DS-KV8102-IM and is the answer not in the manual?
General| Color | Yes |
|---|---|
| Video codecs | H.264 |
| Certification | FCC, IC, CE, C-TICK, ROHS, REACH, WEEE |
| Number of buttons | 1 buttons |
| Connectivity technology | Wired |
| Sustainability certificates | RoHS |
| Voice codecs | G.711u |
| Proper use | Outdoor |
| Product color | Aluminum |
| International Protection (IP) code | IP65 |
| Cabling technology | 10/100Base-T(X) |
| Ethernet LAN data rates | 10, 100 Mbit/s |
| Ethernet interface type | Fast Ethernet |
| Ethernet LAN (RJ-45) ports | 1 |
| Supported network protocols | TCP/IP, RTSP |
| Indoor unit included | No |
| Operating system installed | Linux |
| Operating relative humidity (H-H) | 10 - 90 % |
| Door station operating temperature (T-T) | -40 - 70 °C |
| Outdoor unit power type | AC/DC |
| Power consumption (typical) | 12 W |
| LED type | IR |
| Megapixel | 1.3 MP |
| Sensor type | CMOS |
| Maximum frame rate | 25 fps |
| Maximum video resolution | 1280 x 720 pixels |
Weight and Dimensions| Depth | 33 mm |
|---|---|
| Width | 100 mm |
| Height | 182 mm |
| Door station dimensions (WxDxH) | 100 x 33 x 182 mm |
Critical safety precautions that could lead to serious injury or death if neglected.
Provides instructions for mounting the DS-KV8X02-IM door station onto a wall.
Instructions for installing the DS-KV8102-XP model on a wall.
Steps to activate the device using the Batch Configuration Tool.
How to modify network settings like IP address and gateway via the configuration tool.
Explains how to add devices to the configuration software for remote management.
General steps for accessing remote configuration of devices.
Procedures for rebooting, restoring defaults, and importing/exporting configuration files.
How to manage user accounts and change passwords for device access.
Settings related to video intercom functionality.
Configuring network parameters for linked devices like master stations and SIP servers.
Tool for assigning, activating, and configuring devices for community setup.
Establishing the community's organizational structure within the setup tool.
Activating and configuring the main door station, including building numbers and IP addresses.
Configuring sub door stations, including amount, IP, and linking to main stations.
Process for upgrading firmware on multiple devices simultaneously.
Procedures for upgrading device firmware using files or online methods.
Configuring video intercom parameters like ringtone, speaking duration, and card reader type.
Managing video intercom devices: activation, addition, editing, and deletion.
Changing network parameters of a selected device within iVMS-4200.
Procedures for resetting the device password using iVMS-4200.
Details on remotely configuring devices using iVMS-4200.
Managing video intercom devices, including visual communication and call management.
Managing resident and other cards for access control.
Creating and managing groups (communities, outer door stations, etc.) in iVMS-4200.
Process of issuing cards to residents and staff via iVMS-4200.
Ways to cancel issued cards via iVMS-4200.
Setting the arming status of devices and managing alarm events.
How to make calls to residents using the DS-KV8X02-IM door station.
Procedure for calling residents using the DS-KV8102-XP door station.
Assigning cards to the door station or doorphone by issuing them.
To Next Page
