Need help?Do you have a question about the HIKVISION DS-KV8213-WME1 and is the answer not in the manual?
General| Color | - |
|---|---|
| Relay inputs | 1 |
| Speakerphone | Yes |
| Number of buttons | 2 buttons |
| Connectivity technology | Wired |
| Megapixel | 2 MP |
| Maximum frame rate | 30 fps |
| Supported video modes | 480p, 1080p |
| Viewing angle, vertical | 75 ° |
| Maximum video resolution | 1920 x 1080 pixels |
| Viewing angle, horizontal | 129 ° |
| Voice codecs | G.711u |
| LED type | IR |
| Night vision distance | 3 m |
| Outdoor unit power type | DC |
| Power consumption (typical) | 10 W |
| Display diagonal | - \ |
| Operating temperature (T-T) | -40 - 53 °C |
| Operating relative humidity (H-H) | 10 - 95 % |
| IK code | IK08 |
| Proper use | Outdoor |
| Product color | Gray |
| International Protection (IP) code | IP65 |
| Package depth | 120 mm |
| Package width | 140 mm |
| Package height | 220 mm |
| Indoor unit included | No |
| Networking standards | IEEE 802.3af |
| Ethernet LAN data rates | 10, 100 Mbit/s |
| Ethernet interface type | Fast Ethernet |
| Supported network protocols | TCP/IP, RSTP |
| Operating system installed | Linux |
Weight and Dimensions| Weight | 385 g |
|---|
Details physical appearance and components of the single-button model.
Describes physical appearance and components of the two-button model.
Details physical appearance and components of the four-button model.
Explains the function of each terminal interface on the device.
Provides guidance on connecting door locks, contacts, exit buttons, and alarm devices.
Lists and describes the accessories included with the door station.
Steps for mounting the device on a surface using a protective shield.
Instructions for installing the device on a surface without a protective shield.
Guide on activating the door station through a web browser interface.
Instructions for activating the device using the iVMS-4200 client software.
Steps to modify IP address, gateway, and other network settings via client software.
Accessing and using the live video feed of the door station through a web browser.
Managing user accounts, including adding, editing, and deleting users.
Managing connected devices, including adding, importing, exporting, and upgrading.
Configuring local parameters, record files, and picture/clip settings via web interface.
Configuring system-wide settings such as basic info, time, DST, and maintenance.
Adjusting display parameters, OSD settings, and target cropping for the camera image.
Configuring motion detection, event linkage, and call schedules for device events.
Setting up device IDs, linked network parameters, and time parameters for intercom functions.
Configuring custom ring-back tones for button presses and number settings.
Setting up and configuring the elevator control function for the door station.
Managing device activation, adding, editing, and deleting devices in the client software.
Accessing live video feeds from the door station within the client software.
Creating and managing organizational structures within the client software.
Managing person information, including adding, editing, issuing cards, and importing/exporting.
Configuring video intercom functions, checking call logs, and managing notices via client software.
Provides a matrix of communication ports for Hikvision access control and video intercom devices.
Lists common serial port commands for Hikvision access control and video intercom devices.
To Next Page