DS-KV8x13-WME1 Video Intercom Villa Door Station User Manual
UM DS-KV8x13-WME1 Villa Door Station 062321NA 19
Create a password, and confirm the password.
STRONG PASSWORD RECOMMENDED − We highly recommend that you create a strong
password of your own choosing (using a minimum of eight characters, including at least
three of the following categories: upper case letters, lower case letters, numbers, and
special characters) in order to increase the security of your product. We also recommend
that you reset your password regularly. Especially in high security systems, resetting the
password monthly or weekly can better protect your product.
Proper configuration of all passwords and other security settings is the responsibility of the
installer and/or end-user.
Click OK to activate the device.
NOTE: If the device is not activated, the basic operation and remote operation of device
cannot be performed.
Hold the Ctrl or Shift key to select multiple online devices, and click the Activate
button to activate devices in batch.
4.3. Edit Network Parameters
To operate and configure the device via a LAN (Local Area Network), connect the device to the same
subnet as your PC. You can edit network parameters via iVMS-4200 client software.
Steps
Select an online activated device and click Modify Netinfo.
Edit the device IP address and gateway address to be the same subnet as your computer.
Enter the password and click OK to save the network parameters modification.
NOTE: The default port no. is 8000.
The default door station IP address is 192.0.0.65.
After editing the device network parameters, add the devices to the device list
again.