Need help?Do you have a question about the HIKVISION DS-KV8102-1C and is the answer not in the manual?
General| Model | DS-KV8102-1C |
|---|---|
| Category | Intercom System |
| Brand | HIKVISION |
| Type | Video Intercom |
| Audio Input | Built-in microphone |
| Audio Output | Built-in speaker |
| Operating Humidity | 10% to 90% |
| IP Level | IP65 |
| Installation | Wall-mounted |
| Resolution | 1024 × 600 |
| Video Standard | H.264 |
| Frame Rate | 25 fps |
| Network Interface | 10/100 Mbps Ethernet |
| Network Protocol | TCP/IP |
| Relay Output | 1 output |
| RS-485 | 1 |
| Tamper Switch | 1 |
| Power Supply | DC 12V |
| Power Consumption | ≤ 10W |
Lists the primary capabilities and features of the door station.
Illustrates and describes the external parts of the DS-KV8X02-1A and DS-KV8102-XC models.
Details installation steps and requirements for the DS-KV8X02-1A model.
Details installation steps and requirements for the DS-KV8102-XC model.
Covers various electrical wiring configurations for door station functions.
Guides on activating the device and setting a strong password for security.
Explains the different methods for adding devices to the configuration software.
Introduces accessing and configuring devices remotely through the software.
Guides on configuring system-wide video intercom parameters within iVMS-4200.
Covers managing devices like activation, adding, editing, and remote configuration.
Guides on the process of issuing access cards to residents or staff.
Explains how to initiate a call to a resident from the door station.
Explains how to unlock the door by using an assigned access card.
Provides detailed technical specifications for the door station models.
To Next Page