HIKVISION DS-KV8102-1C - Wiring of Alarm Device Input

Video Intercom Door Station·User Manual
14
ALARM_GND ALARM_n
Figure 5-12 Door Switch Wiring
To connect door switch button in terminal ALARM_n（ALARM_1~ALARM_4）
/ALARM_GND, it is required to set the input of terminal ALARM_n
（ALARM_1~ALARM_4）/ALARM_GND to be door switch button with video
intercom configuring tool software or iVMS-4200 client software.
5.3.4 Wiring of Alarm Device Input
Please refer to the following figure for NO detector wiring.
ALARM_n ALARM_GND
Alarm Devices
+
-
Figure 5-13 Wiring of Alarm Device Input