Need help?Do you have a question about the HIKVISION DS-KV8202-IM and is the answer not in the manual?
General| Color | Yes |
|---|---|
| Video codecs | H.264 |
| Certification | FCC, IC, CE, C-TICK, ROHS, REACH, WEEE |
| Number of buttons | 2 buttons |
| Connectivity technology | Wired |
| Sustainability certificates | RoHS |
| Voice codecs | G.711u |
| Megapixel | 1.3 MP |
| Sensor type | CMOS |
| Maximum frame rate | 25 fps |
| Maximum video resolution | 1280 x 720 pixels |
| Proper use | Outdoor |
| Product color | Aluminum |
| International Protection (IP) code | IP65 |
| LED type | IR |
| Outdoor unit power type | AC/DC |
| Power consumption (typical) | 12 W |
| Operating relative humidity (H-H) | 10 - 90 % |
| Door station operating temperature (T-T) | -40 - 70 °C |
| Operating system installed | Linux |
| Cabling technology | 10/100Base-T(X) |
| Ethernet LAN data rates | 10, 100 Mbit/s |
| Ethernet interface type | Fast Ethernet |
| Ethernet LAN (RJ-45) ports | 1 |
| Supported network protocols | TCP/IP, RTSP |
| Indoor unit included | No |
Weight and Dimensions| Depth | 33 mm |
|---|---|
| Width | 100 mm |
| Height | 182 mm |
| Door station dimensions (WxDxH) | 100 x 33 x 182 mm |
Details compliance with FCC rules for digital devices and potential interference.
Specifies the two conditions under which the device operates according to FCC rules.
States product compliance with European standards and directives like EMC and RoHS.
Confirms the device meets Industry Canada standards for digital devices.
Guidelines to prevent danger, injury, death, or equipment damage when using the product.
Describes the door station's functions and primary application in smart community video intercom solutions.
Lists key functionalities like video intercom, HD surveillance, access control, and alarm functions.
Details the physical components and layout of the DS-KV8X02-IM door station.
Illustrates the physical components and layout of the DS-KV8102-XP door station.
Illustrates a typical network setup for DS-KV8X02-IM door station in a residential environment.
Shows a typical network setup for DS-KV8102-XP door station in a residential environment.
Provides a detailed description of all terminals and interfaces on the door station.
Details wiring for door locks, magnetic sensors, exit buttons, alarm devices, and controllers.
Provides step-by-step instructions for installing the DS-KV8X02-IM door station using a gang box.
Details the process for installing the DS-KV8102-XP door station, including mounting plate and gang box.
Guides on activating the device by setting a strong password using the Batch Configuration Tool.
Explains how to modify device IP address and gateway via the batch configuration tool.
Details methods to add devices to the software for remote configuration: online, by IP address, or by IP segment.
Covers remote configuration options like System, Video Intercom, Network, and Video Display settings.
Introduces the tool for assigning, activating, and configuring devices and network parameters.
Provides instructions for upgrading device firmware via file or online methods.
Configures core video intercom parameters like ringtone, speaking duration, and card reader type.
Covers adding, modifying, and resetting devices within the iVMS-4200 software.
Refers to the Batch Configuration Tool section for remote configuration steps.
Details setting up storage servers, formatting HDDs, and configuring picture storage for captured images.
Manages video intercom devices, groups, cards, and notices within iVMS-4200.
Allows setting the arming status of devices and managing alarm events.
Explains how to initiate calls to residents using the call button on the door station.
Details the process of assigning cards to the door station or doorphone.
Describes how to unlock the door by swiping an issued card on the card induction area.
Provides guidance on optimal spacing between devices to prevent audio feedback like howling and echo.
Lists the specifications for various cables used in the door station installation.
To Next Page