Chapter 2 Startup and Main Menu
2.1 Startup
When the device is o, hold on the device side to start it up. Then you will enter the following
page.
Figure 2-1 Startup Page
Table 2-1 Startup Page
Descripon
No. Descripon
1 Recording status: If the device is not recording, the icon is white. Aer
recording starts, the icon changes to red.
2 Remaining recording me: The me is variable and is relevant with the
bitrate.
3 The current date and me.
4 Bluetooth connecon status: If the device is not connected to the
bluetooth device, or the connecon fails, the icon is gray. Aer the
device is connected to the bluetooth device, the icon changes to white.
Body Camera User Manual
2