HIKVISION DS-MCW407 Series - Video and Network Stream Parameters; Camera Parameters

2. Set Video
Resoluon, Bitrate, Frame Rate, and Video Clip.
Video Clip
The max. me length of the video le.
5.6.3 Set Network Stream Parameters
You can set the network stream parameters when previewing the device via plaorm.
Steps
1. Select Network
Sengs.
2. Set Net Resoluon, Net Bitrate, and Net Frame Rate.
5.7 Set Camera Parameters
You can set the captured picture resoluon.
Steps
1. Select Camera Sengs → Picture Quality .
2. Select the picture
resoluon.
5.8 Set Pre-Record
You can set the me to record before the recording start me.
Steps
1. Select Camera
Sengs → Pre-Record .
2. Select the pre-record duraon.
5.9 Set Post-Record
You can set the me to record aer the recording end me.
Steps
1. Select Camera Sengs → Post-Record .
2. Select the post-record
duraon.
5.10 Set
Overwrien Record
You can enable overwrien record to keep recording when the available memory is insucient,
and the former recorded videos will be overwrien.
Body Camera User Manual
14