HIKVISION DS-MCW407 Series - Zoom Functionality

No. Descripon
5 Plaorm connecon status: If the device is not connected to the
plaorm, or the connecon fails, the icon is gray. Aer the device is
connected to the plaorm, the icon changes to white.
6 Wi-Fi connecon status: If the device is not connected to Wi-Fi, or the
connecon fails, the icon is gray. Aer the device is connected to Wi-Fi,
the icon changes to white.
7 3G/4G connecon status: If the device is not connected to 3G/4G or the
connecon fails, the icon is gray. Aer the device is connected to 3G/4G,
the icon displays as (4G as the example).
8 Posioning status: If posioning is not enabled, the icon is gray. If
posioning fails, the icon displays as (red). If posioning succeeds, the
icon displays as (blue).
9 The baery status and remaining baery.
10 The device ID and policeman ID.
11 The zooming mulple.
12 The available memory.
13 The TF card status.
2.2 Main Menu
Aer the device starts up, it will enter the camera page automacally. Tap to enter the main
menu. The descripon of the main menu is shown as the table below.
Table 2-2 Main Menu
Descripon
Menu Descripon
Playback Select it to view the videos, audios, and pictures saved in the
device.
Camera Sengs Select it to set video stream parameters, capture parameters,
pre-record, and post-record.
Network Sengs Select it to set network transmission stream parameters,
plaorm, Wi-Fi, dialing,etc.
System Sengs Select it to set system parameters such as IR, posioning,
indicator, etc.
Body Camera User Manual
3