HIKVISION DS-MCW407 Series - Voice Prompts and Encoding

5.4 Set System Sound
You can enable or disable the system sound.
Steps
1. Select System
Sengs → System Volume .
2. Select On or
O according to your needs.
Result
If you enable the
funcon, there will be system sound when you start/stop recording, start/stop
taping, start/stop capturing, press
/ / / , and power on/o the device.
5.5 Set Voice Prompt
You can enable or disable the voice prompt when you start/stop recording/taping.
Steps
1. Select System Sengs → Voice Prompt .
2. Select ON or OFF according to your needs.
Result
If you enable the funcon, there will be voice prompt when you start/stop recording/taping.
5.6 Set Encoding Parameters
5.6.1 Set Video Encoding Type
The video encoding type will aect the quality of live view, videos, and captured pictures.
Steps
1. Select Camera Sengs → Encode Type .
2. Select H.264 or H.265.
Note
Reboot the device to take the new sengs into eect.
5.6.2 Set Video Stream Parameters
You can set the video stream parameters when recording.
Steps
1. Select Camera Sengs.
Body Camera User Manual
13