HIKVISION DS-MCW407 Series - Chapter 5 System Settings; Positioning and Indicators; IR Light and Sound Settings

Chapter 5 System Sengs
5.1 Set Posioning
You can set posioning to locate the posion of the device.
Steps
1. Select System
Sengs → Posioning .
2. Select the posioning mode according to your needs.
Result
The blue posioning icon appears on the live view page, indicang the posioning succeeded.
5.2 Enable Indicator
Enable indicator to indicate the device status.
Steps
1. Select System Sengs → Led .
2. Select On.
Note
Refer to "Quick Start Guide" for the indicator status and colors.
5.3 Enable IR Light
You can enable IR light to supplement light for record at night or in dim environment.
Steps
1. Select System Sengs → Infrared .
2. Select AUTO, ON, or OFF according to your needs.
AUTO
IR light will be enabled only when the environment is dim and recording or remote live view
starts.
ON
No
maer how the environment light is, once you start recording, IR light will be enabled.
Body Camera User Manual
12