Operation
6
Formatting
3.Secure the sounder with other three screws.
4.Fix the front panel on the sounder body. Tighten the set screw to complete the installation.
Hold the tamper button, and push the power switch to ON simultaneously. Release the tamper button after 8 s, and the
device will starts formatting. While the formatting is completed, the red LED ashes 3 times.
3
ON
OF F
Hangzhou Hikvision Digital Technology CO.,Ltd. No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China
To Next Page
Loading...
