HIKVISION DS-TMG033 - Barrier Gate Radar Installation

DS-TMG033 Barrier Gate Radar User Manual
11
Figure 2-3 Radar Cable and Interfaces
Table 2-2 Corresponding Table of Cables and Interfaces
Cable
Interface
J1-1(Brown), J1-2(Yellow)
Relay output
J2-1(White), J2-2(Purple)
Calibration button input
T/R+(Green), T/R-(Blue)
485 communication
GND(Black), +12V(Red)
12 V power supply
2.3 Barrier Gate Radar Installation
Barrier gate radar supports both external and internal installation. Detailed installation is shown as
below.
2.3.1 Anti-Fall Radar
Anti-fall radar must be longitudinally mounted.
Step 1 Install six welding studs on the rack as shown in figure 2-4.