Network Video Recorder Quick Start Guide
16
If NVR has logged out, you must login the device before operating the menu and other functions.
Step 1 Select the User Name in the dropdown list.
Figure 3-6 Login
Step 2 Input Password.
Step 3 Click OK.
In the Login dialog box, if you enter the wrong password 7 times, the current user account will be
locked for 60 seconds.
3.5 Using the Setup Wizard
The Setup Wizard can guide you to configure the system resolution, system date/time, HDD
initialization, IP camera management, etc.
Figure 3-7 Wizard
3.6 Network Settings
Purpose:
Network settings must be properly configured before you operate NVR over network.
Step 1 Enter the general network settings interface.
To Next Page
Loading...
