Digital Video Recorder User Manual
194
Chapter 15 Others
15.1 Configuring General Settings
Purpose
You can configure the output resolution, system time, mouse pointer speed, etc.
Step 1 Go to Menu > Configuration > General > General.
Figure 15-1 General Settings Interface
Step 2 Configure the following settings:
Language: The default language used is English.
Output Standard: Select the output standard to be PAL or NTSC.
VGA/HDMI Resolution: Select the output resolution, which must be the same with the
resolution of the VGA/HDMI display.
Time Zone: Select the time zone.
Date Format: Select the date format.
System Date: Select the system date.
System Time: Select the system time.
Mouse Pointer Speed: Set the speed of mouse pointer; 4 levels are configurable.
Enable Wizard: Enable/disable the Wizard when the device starts up.
Enable Password: Enable/disable the use of the login password.
To Next Page
Loading...
Need help?
General
