HIKVISION HWD-5108H How-To

www.hi-watch.eu
How to Add IP Camera to Non-PoE NVR
Steps:
1. Connect the devices.
2. Activate the devices and enable DHCP.
3. Go to the NVR’s website and add IPC.
Preparation
1 windows system PC,
At least 1 IP Camera,
1 Network Video Recorder,
At least 3 network cable,
1 POE Switch /non-POE Switch & compatible
power adapter for IP Camera.
Key Step 1 Connect the devices.
Steps:
1. You should connect the devices as below. And power up all the devices.
Key Step 2 Activate the devices and enable DHCP.
Steps:
1. Open SADP tool. Select an inactive device. Set the password and confirm it. Click active.

HIKVISION HWD-5108H Specifications

General

Model	HWD-5108H
Type	DVR
Channels	8
Hard Drive	1 SATA interface
Hard Drive Capacity	Up to 6TB
Power Supply	12V DC
Operating Temperature	-10 °C to +55 °C (14 °F to 131 °F)
Operating Humidity	10% to 90%
Video Input	8 channel BNC interface
Video Output	HDMI/VGA
Audio Input	1-ch RCA
Audio Output	1-channel RCA
Video Compression	H.264
Network Interface	1 RJ45 10M/100M self-adaptive Ethernet interface
USB Interface	2 USB 2.0