HIKVISION HWN-4116MH - Chapter 2 Live View; GUI Introduction

Network Video Recorder User Manual
5
Chapter 2 Live View
2.1 GUI Introduction
● Click to start/stop auto-switch. The screen will automatically switch to the next one.
● Right click a camera, or click to enter full screen mode.
● Double click a camera to view it in single-screen mode. Double click again to exit single-screen
mode.
● When an error occurs, the screen will display the error description. For some errors, you can
click the screen to directly access the resolving operations.
● Change a camera live view screen by dragging it from its screen to the desired screen.
● Scroll up/down to turn to previous/next screen.
● Position the cursor on a camera to show shortcut menu.
Figure 2-1 Shortcut Menu
Table 2-1 Shortcut Menu Description
Button
Description
Start playing videos recorded in the latest five minutes.
Digital zoom. You can adjust zoom-in times and view the desired area.
Click it to enter PTZ control mode.
Turn on/off live view audio.
Switch video stream.
● In the live view interface, there are icons at the upper-right corner of the screen for each
camera, showing the camera recording and alarm status.
Table 2-2 Live View Icon Description
Icon
Description
Alarming (normal event and smart event).
Recording.
● Right click your mouse to display the shortcut menu.