Network Video Recorder User Manual
63
Figure 6-21 PTZ Linkage
Note
You can set one PTZ type only for the linkage action each time.
Configure Audio and Light Alarm Linkage
For certain network cameras, you can set the alarm linkage action as audio alarm or light alarm.
Before You Start
● Ensure your camera supports audio and light alarm linkage.
● Ensure the audio output and volume are properly configured.
Steps
1. Click Linkage Action.
2. Select audio or light as your desire.
3. Click Apply.
Note
If you require to set audio and light parameters, please log into the network camera via web
browser to configure them.
6.5 Recording Management
6.5.1 Configure Recording Schedule
Video recorder will automatically start/stop recording according to the configured schedule.
Configure Continuous Recording
Steps
1. Go to Configuration → Record → Parameter.
2. Set the continuous main stream/sub-stream recording parameters for the camera.
3. Go to Configuration → Record → Schedule.
To Next Page
Loading...
