HIKVISION iDS-2CD7046G0-AP Quick Start Guide

iDS-2CD7046G0-AP Network Box Camera Quick Start Guide
QSG iDS-2CD7046G0-AP 022321NA 9
2.2 Lens Installation
The actual device appearance may vary by model. The following takes a model as an example to illustrate
the installation steps.
Before You Start
The lens shown below is for example only.
Figure 3, Lens Installation
Steps:
1. Fit the lens (not supplied) to the camera, and rotate it to tighten.
NOTES:
• Install the adapter ring to the lens interface if a C-mount lens is used.
• A manual-iris lens can be directly installed to the camera without plugging the power cable of the
auto-iris to the auto-iris interface.
2. Plug the auto-iris cable to the auto-iris interface.
2.3 Camera Mounting
The actual device appearance may vary by model. The following takes a model as an example to illustrate
the installation steps.
2.3.1 Pendent Mounting
Before You Start
Pendent mount is not included in package. If you adopt this mounting style, you need to prepare a
mounting bracket in advance. The shown pendent mount is for example.

HIKVISION iDS-2CD7046G0-AP Specifications

General

Brand	HIKVISION
Model	iDS-2CD7046G0-AP
Category	Security Camera
Language	English