HIKVISION iDS-2CD7046G0-AP Quick Start Guide

iDS-2CD7046G0-AP Network Box Camera Quick Start Guide
QSG iDS-2CD7046G0-AP 022321NA 16
Figure 16, Fix the Housing to Brackets (2)
6. Adjust zoom and focus. Refer to Section 2.5.
2.3.4 Mounting Type II Housing
Steps
1. Connect and route cables through the cable outlet of the housing.
1) For network, alarm input and output, and audio input and output, plug corresponding plugs to the
rear panel of the camera. See Figure 1-1.
2) For power supply and RS-485, see the following figure.
Figure 17, Wiring Board in Housing
2. Buckle the housing.
3. Install the housing to surveillance scene.
Using brackets, the housing supports wall mounting, pole mounting, pendent mounting, column mounting,
integrated mounting, and integrated mounting with junction box. The brackets are shown in the figures
below:

HIKVISION iDS-2CD7046G0-AP Specifications

General

Brand	HIKVISION
Model	iDS-2CD7046G0-AP
Category	Security Camera
Language	English