EasyManuals Logo
Home>HIKVISION>Security Camera>iDS-2CD7A G0-IZH Series

HIKVISION iDS-2CD7A G0-IZH Series User Manual

HIKVISION iDS-2CD7A G0-IZH Series
108 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #18 background imageLoading...
Page #18 background image
iDS-2CD7xxG0-xxxxx Network Bullet Camera User Manual
UM iDS-2CD7xxG0-xxxxx 021021NA 18
HTTP is suitable for situations in which a third-party needs to get the stream from the device.
Play Performance
- Shortest Delay
The device takes the real-time video image as the priority over the video fluency.
- Balanced
The device ensures both the real-time video image and the fluency.
- Fluent
The device takes the video fluency as the priority over real-time. In a poor network environment,
the device cannot ensures video fluency even if the fluency is enabled.
- Custom
You can set the frame rate manually. In a poor network environment, you can reduce the frame
rate to get a fluent live view. But the rule information may not display.
3. Click OK.
Set Smooth Streaming
This function tackles latency and network congestion caused by unstable network condition, and keeps
the live view stream on the Web browser or the client software smooth.
Before You Start
Add the device to your client software and select NPQ protocol in client software before configuring the
smooth streaming function.
Be sure that the Bitrate Type is selected as Constant and SVC is selected as OFF before enabling the
function. Go to Configuration Video/Audio Video to set the parameters.
Steps
1. Go to the settings page: Configuration Network Advanced Settings Smooth Streaming.
2. Check Enable Smooth Streaming.
3. Select the mode for smooth streaming.
Auto: The resolution and bitrate are adjusted automatically, with resolution taking priority. The
upper limits of these two parameters will not exceed the values you set on the Video page. Go to
Configuration Video/Audio Video, set the Resolution and Max. Bitrate before you enable the
smooth streaming function. In this mode, the frame rate will adjust to the maximum value
automatically.
Resolution Priority: The resolution stays the same as the set value on the Video page, and the
bitrate will be adjusted automatically. Go to Configuration Video/Audio Video, set the Max.
Bitrate before you enable smooth streaming function. In this mode, the framerate will be adjusted to
the maximum value automatically.

Table of Contents

Other manuals for HIKVISION iDS-2CD7A G0-IZH Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HIKVISION iDS-2CD7A G0-IZH Series and is the answer not in the manual?

HIKVISION iDS-2CD7A G0-IZH Series Specifications

General IconGeneral
BrandHIKVISION
ModeliDS-2CD7A G0-IZH Series
CategorySecurity Camera
LanguageEnglish

Related product manuals