iDS-2CD7xxG0-xxxxx Network Bullet Camera User Manual
UM iDS-2CD7xxG0-xxxxx 021021NA 26
4. Click , disable the two-way audio function.
Display Settings
This offers the parameter settings to adjust image features. Go to Configuration → Image → Display
Settings.
Click Default to restore settings.
Scene Mode
There are several sets of image parameters predefined for different installation environments. Select a
scene according to the actual installation environment to speed up the display settings.
• Image Adjustment: By adjusting the Brightness, Saturation, Hue, Contrast, and Sharpness, the image
can be best displayed.
• Exposure Settings: Exposure is controlled by the combination of iris, shutter, and photo sensibility.
You can adjust image effect by setting exposure parameters.
In manual mode, you need to set Exposure Time, Gain, and Slow Shutter.
• Focus: It offers options to adjust the focus mode and the minimum focus distance.
Focus Mode
Auto: The device focuses automatically as the scene changes. If you cannot get a well-focused
image under auto mode, reduce light sources in the image and avoid flashing lights.
Semi-auto: The device focuses once after the PTZ and lens zooming. If the image is clear, the focus
does not change when the scene changes.
Manual: You can adjust the focus manually on the live view page.
Min. Focus Distance: When the distance between the scene and lens is shorter than the Min. Focus
Distance, the lens does not focus.
To Next Page
Loading...
Need help?
General
