Network Traffic Camera • User Manual
45
Chapter 9 Capture Parameters Configuration
Purpose:
You can configure capture parameters before capturing, and edit capture parameters when the
default capture parameters cannot meet actual needs.
Configure License Plate Parameters
This series of camera supports license plate recognition.
Go to Configuration > Device Configuration > Capture Parameters > License Parameters.
License Parameters Configuration
Select License Plate Recognition as Front Plate or Back Plate. You should select Front Plate
when you want to capture license plate number in vehicle head, and select Back Plate when
you want to capture license plate number in vehicle tail.
Configure Flash Light Parameters
Go to Configuration > Device Configuration > Capture Parameters > Flash Light Parameters.
Select a tab corresponded with the flash light control port.
To Next Page
Loading...
