HIKVISION iDS-2VS435-F840-EY User Manual

Network Traffic Speed Dome·Quick Start Guide
8
Protective Sticker
Figure 2-6 Remove the Protective Sticker
2) Install the memory card (optional). Unscrew the two screws on the back of the
speed dome and remove the protective cover. Insert the memory card into the
memory card slot.
Note:
The memory card can be installed in factory if you need.
Memory Card Slot
Protective Cover
Figure 2-7 Install the Micro SD card
3) Reinstall the protective cover back and tighten the screws.
3. Install the speed dome to the bracket.
Note:
Refer to step 3 in section 2.1 Installing Type I Speed Dome for installing the speed
dome.

HIKVISION iDS-2VS435-F840-EY Specifications

General

Brand	HIKVISION
Model	iDS-2VS435-F840-EY
Category	Digital Camera
Language	English