HIKVISION iDS-2VS435-F840-EY

Network Traffic Speed Dome·Quick Start Guide
14
4. Press the tape on both ends of the connector to make sure no water can get in as the
figure below.
Press
Press
Press
Press
Figure 2-18 Press the Water-proof Tape
5. Wrap the water-proof tape around the remaining unused cables tightly as the figure
below.
Figure 2-19 Wrap the Unused Cables
Note:
Make sure that all naked wires are all firmly wrapped in the water-proof tape.
6. Press the tape to make sure no water can get in as the figure below.
Press
Press
Press
Press
Figure 2-20 Press the Water-proof Tape