Need help?Do you have a question about the HIKVISION iDS-7216HUHI-M2/S and is the answer not in the manual?
General| Video Input Channels | 16 |
|---|---|
| HDTVI Input | 16 |
| AHD Input | 16 |
| CVI Input | 16 |
| CVBS Input | 16 |
| Video Output | 1 HDMI, 1 VGA |
| Two-Way Audio | Yes |
| Dual Stream | Yes |
| Video Compression | H.265+/H.265/H.264+/H.264 |
| SATA | 2 SATA interfaces |
| USB Interface | 2 USB 2.0 |
| Alarm In/Out | 16/4 |
| Alarm Input | 16 |
| Alarm Output | 4 |
| Power Supply | 12V DC |
| Working Humidity | 10% to 90% |
| IP Video Input | 16 |
| HDMI Output Resolutions | 4K / 1080p / 720p |
| VGA Output Resolutions | 1920x1080 |
| Audio Output | 1 channel |
| Encoding Resolution | Up to 8MP |
| Frame Rate | Up to 30fps |
| Video Bitrate | 32 Kbps to 10 Mbps |
| Audio Bitrate | 64kbps |
| Network Protocols | TCP/IP, DHCP, DNS, DDNS |
| Network Interface | 1 RJ45 10M/100M/1000Mbps |
| Max HDD Capacity | 10TB per HDD |
| Power Consumption | ≤ 20 W |
| Working Temperature | -10 °C to +55 °C (14 °F to 131 °F) |
Guides on activating the device for the first time.
Steps to configure TCP/IP settings for network operation.
Guide to installing and initializing HDDs for storage.
Adding network cameras to the device for live video or recording.
How to begin viewing live video feeds from cameras.
Controlling Pan, Tilt, and Zoom functions of cameras.
Configuring settings for video recording.
Setting main/sub-stream, frame rate, resolution, and bitrate.
Setting up automatic recording based on schedules.
Playing back recorded video files.
Configuring engine usage for specific VCA types.
Configuring face comparison alarms and capture based on recognition.
Detecting objects entering/exiting regions or crossing lines.
Detecting human bodies in the scene and capturing pictures.
Detecting moving objects and triggering alarms.
Detecting vehicles and capturing license plates.
Configuring basic event alarms like video loss and tampering.
Handling VCA detections sent by connected IP cameras.
Setting schedules for when detection events are active.
Configuring actions triggered by alarms or exceptions.
Specifying conditions to search videos and pictures.
Exporting files for backup to USB or eSATA.
Searching human body, face, and vehicle files.
Managing local HDDs, network disks, and eSATA devices.
Configuring HDD groups and properties for storage.
Managing password security settings.
Procedures for resetting forgotten passwords.
Managing security-related settings.
To Next Page