Need help?Do you have a question about the HIKVISION Digital Video Recorder and is the answer not in the manual?
General| Audio system | 2-way |
|---|---|
| Product color | Black |
| Channels quantity | 4 channels |
| Maximum video resolution | 1920 x 1080 pixels |
| Video compression formats | H.264, H.264+, H.265, H.265 Pro, H.265 Pro+ |
| Analog signal format system | NTSC, PAL |
| Playback resolutions supported | 1920x1080, 1280x1024, 1280x720, 1024x768, 704x480, 704x576 |
| Operating temperature (T-T) | -10 - 55 °C |
| Operating relative humidity (H-H) | 10 - 90 % |
| Audio input | RCA |
| RS-485 ports | 1 |
| USB 2.0 ports quantity | 2 |
| DC voltage | 12 V |
| Power consumption (typical) | 18 W |
| HDD interface | Serial ATA, Serial ATA II, Serial ATA III |
| Maximum HDD capacity | 10000 GB |
| Ethernet LAN | Yes |
| Ethernet interface type | Fast Ethernet |
| Supported network protocols | TCP/IP, PPPoE, DHCP, Hik-Connect, DNS, DDNS, NTP, SADP, NFS, iSCSI, UPnP, HTTPS, ONVIF |
Weight and Dimensions| Depth | 242 mm |
|---|---|
| Width | 315 mm |
| Height | 45 mm |
| Weight | 1160 g |
Details the buttons and indicators on the front panel of the DVR.
Describes the various input/output ports and connectors on the rear of the DVR.
Guides through initial setup steps like resolution, date/time, and network.
Explains how to connect and configure network cameras for HDVR models.
Explains the live view function and its icons for real-time video monitoring.
Allows customization of output interfaces, dwell time, audio, and event output.
Details how to set parameters for controlling PTZ cameras via RS-485 interface.
Covers setting and calling camera positions, movement paths, and recorded sequences.
Defines stream type, resolution, bitrate, and quality for video recording.
Sets up automatic start/stop times for recording based on days and times.
Configures motion detection areas, sensitivity, and triggers for recording.
Details methods for accessing and viewing recorded video by channel, time, or event.
Includes features like frame-by-frame playback, smart search, digital zoom, and reverse playback.
Explains exporting recorded video data via quick export, normal search, or event search.
Covers operations for USB drives, HDDs, and DVD-R/W for backup management.
Configures motion detection zones, sensitivity, and arming schedules for alarm triggers.
Sets up handling methods for external sensor alarms, including arming and linkage actions.
Manages device exceptions like HDD errors, network disconnects, and illegal logins.
Configures basic network parameters like IP address, gateway, DNS, and NIC type.
Covers PPPoE, DDNS, NTP, SNMP, NAT, Multicast, RTSP, and HTTPS configurations.
Guides on preparing newly installed hard disk drives for use by initializing them.
Explains how to group multiple HDDs for organized storage and recording.
Allows setting storage quotas per camera to manage disk space efficiently.
Adjusts on-screen display elements like date, time, and camera names.
Sets up zones on video feeds to mask sensitive or private areas.
Fine-tunes image settings such as brightness, contrast, and sharpness for cameras.
Accesses details about device, camera, record, network, and HDD status.
Covers searching, viewing, and exporting operation, alarm, and exception logs.
Details procedures for updating device firmware via local backup or FTP.
Manages output standards, resolution, mouse speed, and wizard options.
Covers adding, deleting, editing users, and managing their permissions and passwords.
Lists IP cameras compatible with the DVR for seamless integration.
Provides definitions for key technical terms used throughout the manual.
To Next Page
