User Manual of DS-7200/7300/8100-SH Series DVR
130
9.1 Configuring General Settings
Purpose:
Network settings must be properly configured before you operate device over network.
Steps (for DS-7200-SH/SV/SL and DS-7300-SH):
1. Enter the Network Settings interface.
Menu > Configuration > Network
2. Select the General tab.
Figure 9.1 General Network Settings of DS-7200-SH/SV/SL
Figure 9.2 General Network Settings of DS-7300-SH
Note: The DS-7204/7208/7216-SH/SV/SL models provide one 10M/100Mbps self-adaptive network
interface, the DS-7224/7232HVI-SH, DS-7224/7332HWI-SH and DS-7300HWI/HFI-SH models
provide one10M/100M/1000Mbps self-adaptive network interface.
3. In the General Settings interface:
You can configure the following settings: NIC Type, IPv4 Address, IPv4 Gateway, MTU and DNS
To Next Page
Loading...
