User Manual of DS-7200/7300/8100-SH Series DVR
37
2.2.2 Configuring the Connected IP Cameras
Editing the connected IP cameras
Purpose:
The detailed information of the added IP cameras will be displayed on a list, and you can configure the basic
setting of the cameras if needed.
Steps:
1. Click the icon on the camera list to enter the Edit IP Camera interface.
Figure 2.19 Edit IP Camera
2. Edit the camera information, such as the IP address, protocol, port, etc.
3. Click the button OK to save the new settings.
4. To delete the added camera, click the icon ;
Or check the corresponding checkbox and click the button Delete.
Description of the icons:
To Next Page
Loading...
