User Manual of DS-7200/7300/8100-SH Series DVR
123
8.3 Detecting Video Loss
Purpose:
Detect video loss of a channel and take alarm response action(s).
Steps:
1. Enter Video Loss interface of Camera Management.
Menu> Camera> Video Loss
Figure 8.12 Video Loss Setup Interface
2. Select a channel you want to detect.
3. Check the checkbox of Enable Video Loss Alarm.
4. Click the icon of Settings to enter the Settings interface.
5. Set the arming schedule and alarm response actions. Please refer to Step4 and Step5 of Chapter 8.1
Setting up Motion Detection Alarm.
Figure 8.13 Set Arming Schedule of Video Loss
6. Click Apply to save the video loss alarm settings.
To Next Page
Loading...
