HIKVISION iDS-TCD403-BI User Manual

In Normal Mode, the higher the 3D DNR Level is, the stronger the noise will be reduced.
But if it is too high, the image may become fuzzy.
In Expert Mode, set Spaal Intensity and Time Intensity. If the space domain intensity is
too high, the outline of the image may become fuzzy and the details may lose. If the
me
domain intensity is too high, trailing may appear.
2D DNR
The higher the 2D DNR Level is, the stronger the noise will be reduced. But if it is too high,
the image may become fuzzy.
Slow
Shuer
This funcon can be used in underexposure condion. It lengthens the shuer me to
ensure full exposure. The higher Slow
Shuer Level is, the slower the shuer speed is.
Video Standard
Select the video standard according to the actual power supply frequency.
Power Synchronizaon
The street lights and trac lights will cause image ashing in live view. Check it, and set Phase
Posion and Signal Frequency to overcome the image ashing in live view.
3.
Oponal: Click Capture Test to check the image.
5.3 Set ICR
ICR adopts mechanical IR lter to lter IR in the day to guarantee the image eect, and to remove
the IR
lter at night to guarantee full-spectrum rays can get through the device.
Steps
1.
Go to Conguraon → Capture → Capture Images → ICR .
2.
Select ICR Mode.
Auto Switch
Switches to ICR mode automacally at night or in dark light condions.
Manual Switch Select Day-night Mode to switch to the day or night manually.
Schedule Switch Set Day-night Mode, Start Time, and End Time to switch to ICR mode only
during the set me period.
3.
Click Save.
5.4 Set ROI
ROI (Region of Interest) encoding helps to assign more encoding resources to the region of
interest, thus to increase the quality of the ROI whereas the background
informaon is less
focused.
Network Trac Camera Operaon Manual
26

HIKVISION iDS-TCD403-BI Specifications

General

Brand	HIKVISION
Model	iDS-TCD403-BI
Category	Security Camera
Language	English