HIKVISION TS-A018-120015AD User Manual

Before You Start
●
Wake up the device. Refers to Wake Up the Device for details.
●
On the main page of the device, tap Sengs → Advanced Sengs to enable the
Zone Alarm funcons.
●
You should create an arm/disarm password. Please refers to
Operaon Password
Sengs for the details.
Steps
1. On the main page of the device, tap Stay to enter the scene page.
2. Select Stay, Away, Sleeping or Custom.
3. Enter the arm/disarm password to enable the scene.
4. Tap OK.
Note
You can also tap → Arm to enable the scene.
4.3.2 Disarm Your Room
Before You Start
Wake up the device. Refers to Wake Up the Device for details.
Steps
1.
On the main page of the device, tap
→ Disarm to disarm.
2. Enter the arm/disarm password.
3. Tap OK.
4.4 Arming Mode
Sengs
4 arming modes can be congured: stay mode, away mode, sleeping mode and
custom mode.
Before You Start
Wake up the device. Refers to Wake Up the Device for details.
Tap Sengs → Advanced Sengs to enable Zone Alarm funcons.
Note
Admin password is required to enter the advanced sengs page.
Video Intercom 9 Series Indoor Staon Operaon Guide
13

HIKVISION TS-A018-120015AD Specifications

General

Brand	HIKVISION
Model	TS-A018-120015AD
Category	Intercom System
Language	English