EasyManua.ls Logo

HIKVISION DS-KD8102-V

HIKVISION DS-KD8102-V
114 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Video Intercom Door Station
(D Series)
User Manual
UD06326B

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the HIKVISION DS-KD8102-V and is the answer not in the manual?

HIKVISION DS-KD8102-V Specifications

General IconGeneral
ColorYes
Video codecsH.264
CertificationFCC, IC, CE, C-TICK, ROHS, REACH, WEEE
Number of buttons14 buttons
Connectivity technologyWired
Sustainability certificatesRoHS
Proper useOutdoor
Product colorBlack
Outdoor unit housing materialPlastic
International Protection (IP) codeIP65
Voice codecsG.711u
Display diagonal3.5 \
Display resolution480 x 320 pixels
Display technologyLCD/TFT
Display aspect ratio3:2
Wi-FiNo
Cabling technology10/100/1000Base-T(X)
Ethernet LAN data rates10, 100, 1000 Mbit/s
Ethernet interface typeGigabit Ethernet
Ethernet LAN (RJ-45) ports1
Operating system installedLinux
Operating relative humidity (H-H)10 - 90 %
Door station operating temperature (T-T)-40 - 70 °C
Outdoor unit power typeAC/DC
Power consumption (typical)15 W
Megapixel1.3 MP
Sensor typeCMOS
Maximum frame rate30 fps
Maximum video resolution1280 x 720 pixels
Weight and Dimensions IconWeight and Dimensions
Depth61 mm
Width145 mm
Height418 mm
Door station dimensions (WxDxH)145 x 61 x 418 mm

Summary

Safety and Regulatory Compliance

Safety Precautions and Warnings

Essential safety guidelines to prevent injury and equipment damage.

Regulatory Compliance Information

Details FCC and EU conformity standards for the product.

Product Overview, Appearance, and Wiring

System Introduction and Device Features

Explains the video intercom system's functions, applications, and key features.

Device Appearance and Model Identification

Illustrates the physical layout and components of different door station models.

Terminal Descriptions and Wiring Guide

Explains device terminals and provides wiring diagrams for connecting external components.

Installation and Initial Setup

Physical Installation Procedures

Step-by-step instructions for mounting the door station models.

Initial Device Activation and Configuration

Guides on activating the device and performing initial setup tasks.

Device Operation and Remote Management

Local Operation and Settings Management

Covers local device controls, status indicators, and parameter adjustments.

Remote Configuration with Batch Tool

Explains remote device configuration and management using the Batch Configuration Tool.

iVMS-4200 Client Software Management

Details remote management and configuration of devices via the iVMS-4200 client software.

Related product manuals