Need help?Do you have a question about the HIKVISION DS-KD3002-VM and is the answer not in the manual?
General| Operating system installed | Linux |
|---|---|
| Display diagonal | 3.5 \ |
| Display resolution | 480 x 320 pixels |
| Display technology | LCD/TFT |
| Video formats supported | H.264 |
| Megapixel | 1.3 MP |
| Sensor type | CMOS |
| Maximum frame rate | 30 fps |
| Supported video modes | 720p |
| Maximum video resolution | 1280 x 720 pixels |
| Proper use | Outdoor |
| Product color | Black, White |
| Placement supported | Vertical |
| Outdoor unit housing material | Aluminum |
| International Protection (IP) code | IP65 |
| Indoor unit included | No |
| Outdoor unit included | Yes |
| Speakerphone | - |
| Certification | FCC, IC, CE, C-TICK, REACH, WEEE |
| Connectivity technology | Wired |
| Sustainability certificates | RoHS |
| Cabling technology | 10/100/1000Base-T(X) |
| Ethernet LAN data rates | 100, 1000 Mbit/s |
| Ethernet interface type | Gigabit Ethernet |
| Ethernet LAN (RJ-45) ports | 1 |
| Supported network protocols | TCP/IP, RTSP |
| Outdoor unit power type | DC |
| Power consumption (typical) | 15 W |
| Operating temperature (T-T) | -40 - 60 °C |
| Operating relative humidity (H-H) | 10 - 90 % |
| Voice codecs | G.711u |
Weight and Dimensions| Depth | 55 mm |
|---|---|
| Width | 124 mm |
| Height | 357 mm |
Information regarding Hikvision's registered trademarks and copyright notice.
Legal disclaimer concerning the use of the manual and Hikvision's liability limitations.
Guidance on contacting local dealers for any questions or support needs.
Details FCC compliance requirements and potential interference issues for the device.
Outlines the two conditions under which the device must operate according to FCC rules.
Confirms the product's compliance with applicable European standards and directives.
States compliance with Industry Canada standards for digital apparatus.
Highlights critical safety precautions to prevent serious injury or death.
Emphasizes precautions to prevent potential injury or equipment damage.
Provides a general overview of the video intercom system and its applications.
Lists the key functionalities and capabilities of the video intercom door station.
Visual description and key identification for the DS-KD8102-V model.
Visual description and key identification for the DS-KD8002-VM model.
Visual description and key identification for the DS-KD3002-VM model.
Details the terminal connections and interfaces for the intercom door station models.
Provides instructions and diagrams for various wiring configurations, including door locks and exit buttons.
Guides on how to install the DS-KD8102-V door station, including using a gang box.
Details the dimensions and mounting of the gang box for DS-KD8102-V.
Step-by-step instructions for wall mounting the DS-KD8102-V using a gang box.
Guides on how to install the DS-KD8002-VM door station, including using a gang box.
Provides dimensions and mounting details for the DS-KD8002-VM gang box.
Step-by-step guide for wall mounting the DS-KD8002-VM using its gang box.
Guides on how to install the DS-KD3002-VM door station, including using a gang box.
Details the dimensions and mounting of the gang box for the DS-KD3002-VM.
Instructions for wall mounting the DS-KD3002-VM using its specific gang box.
Explains the function of each key on the door station's interface.
Step-by-step guide on how to activate the door station device.
Describes the status icons displayed by the door station.
Covers how to configure network, local settings, password, and volume.
Details how to set local parameters like community, building, and floor numbers.
Explains how to configure network connection parameters for the door station.
Guides on changing configuration and card activation passwords for security.
Instructions for issuing access cards locally via main card or password.
Explains how to adjust the volume settings for the door station.
Provides information on viewing the device version and status.
Details how to make calls to residents from the door station.
Explains the methods for unlocking doors, either by password or card.
Guides on activating door station devices remotely using the Batch Configuration Tool.
Instructions for modifying network parameters of door stations via batch configuration.
Methods for adding devices to the batch configuration software by online, IP, or IP segment.
Covers general remote configuration of devices via the Batch Configuration Tool.
Details on configuring system parameters like device information and maintenance.
Covers remote configuration for video intercom features like device ID and time parameters.
Instructions for configuring local and linked network parameters for the door station.
Guides on adjusting video display settings like brightness and saturation.
Tool for assigning devices to communities, activating, and setting parameters.
Steps to define the community structure within the device set-up tool.
Guides on configuring main and sub door stations, including IP and floor numbers.
Procedures for performing batch firmware upgrades on multiple devices.
Process for adding devices to the batch upgrading tool.
Instructions on how to upgrade door station firmware using local files.
Details on configuring system-wide video intercom parameters within iVMS-4200.
Covers activation, adding, editing, and deleting video intercom devices in iVMS-4200.
Steps to add indoor stations, master stations, and door stations to the iVMS-4200 software.
Guides on how to modify network settings for added devices in iVMS-4200.
Methods for resetting device passwords using iVMS-4200 client software.
Modules for managing video intercom features like group management and card management.
Steps to create and manage groups for communities, outer door stations, and others.
Covers adding, issuing, and canceling access cards for residents and staff.
General advice for installing indoor stations to avoid interference.
Lists common cables and their specifications used for door station wiring.
To Next Page
