Do you have a question about the HIKVISION DS-KD8003-IME2 and is the answer not in the manual?
Megapixel | 2 MP |
---|---|
Maximum frame rate | 30 fps |
Supported video modes | 720p, 1080p |
Viewing angle, vertical | 96 ° |
Maximum video resolution | 1920 x 1080 pixels |
Viewing angle, horizontal | 180 ° |
Video codecs | H.264 |
Number of buttons | 1 buttons |
Streaming capability | Yes |
Connectivity technology | Wired |
Maximum number of cameras supported | - |
Voice codecs | G.711u |
Product color | Black, Grey |
International Protection (IP) code | IP65 |
Operating relative humidity (H-H) | 10 - 95 % |
Door station operating temperature (T-T) | -40 - 60 °C |
Indoor unit included | No |
Outdoor unit power type | DC |
Display diagonal | - \ |
Harmonized System (HS) code | 85176920 |
Details the physical appearance and components of the main unit and various modules.
Details terminals for main and two-wire main units.
Details terminals for sub modules and the touch-display module.
Instructions for wiring the door lock mechanism.
Instructions for wiring door contact sensors, exit buttons, and card readers.
Guides on setting the sub module address using DIP switches.
Installation procedures for two-module configurations.
Installation procedures for three-module configurations.
Installation for configurations with more than three modules.
Guides on activating the device and editing network settings.
Viewing live feeds and configuring basic parameters like user and device management.
Configuring network, video, audio, image, event, schedule, and intercom settings.
Configuring access control, elevator control, and theme settings.
Managing devices, adding, and viewing live feeds via client software.
Configuring device settings remotely using client software.
Managing organizations and person data within the client software.
Performing intercom functions like calling, issuing cards, and unlocking doors via the device.
Performing intercom functions via client software, including call logs and search.
Searching for door unlocking events and related logs.
Details power consumption and wire testing standards for intercom products.
General guidelines for device installation environments and connections.
Information on communication matrix and device commands via QR codes.