HIKVISION DS-KD8003-IME2 User Manual

Before You Start
You can check all the call logs, including dialed call logs, received
call logs and missed call logs. You can also directly dial via the log
list and clear the logs.
Steps
1. In the Video Intercom page, click Call Log to enter the Call Log
page.
Figure 8-5 View Call Logs
All the call logs will display on this page and you can check the
log informaon, e.g., call status, start me, resident's
organizaon and name, device name and ring or speaking
duraon.
2. Oponal: Click the call buon to re-dial the resident.
8.2.4 Search Video Intercom
Informaon
You can search the call logs between the iVMS-4200 client
soware and video intercom devices, device unlocking logs and
the sent noce informaon.
In the main page, click AccessControlInfo to enter the
access control module.
In the Access Control module, click Video Intercom.
Search Call Logs
Steps
1. In the Video Intercom page, click Call Log to enter the Call Log
page.
Figure 8-6 Call Logs
2. Set the search condions, including call status, device type,
start
me and end me.
Call Status
82

HIKVISION DS-KD8003-IME2 Specifications

General

Megapixel	2 MP
Maximum frame rate	30 fps
Supported video modes	720p, 1080p
Viewing angle, vertical	96 °
Maximum video resolution	1920 x 1080 pixels
Viewing angle, horizontal	180 °
Video codecs	H.264
Number of buttons	1 buttons
Streaming capability	Yes
Connectivity technology	Wired
Maximum number of cameras supported	-
Voice codecs	G.711u
Product color	Black, Grey
International Protection (IP) code	IP65
Operating relative humidity (H-H)	10 - 95 %
Door station operating temperature (T-T)	-40 - 60 °C
Indoor unit included	No
Outdoor unit power type	DC
Display diagonal	- \
Harmonized System (HS) code	85176920