HIKVISION DS-KD8003-IME2 User Manual

Audio Channel
Select the audio channel to adjust the audio parameters.
Stream Type
Select the stream type to main stream or sub stream.
Audio Encoding
The device support G.711ulaw and G.711 alaw.
3. Adjust the Input Volume, Output Volume and Speak Volume.
Note
Available range of volume: 0 to 10.
4. Click Save to save the sengs.
7.3.6 Image Sengs
Display Sengs
Congure the image adjustment, backlight sengs and other
parameters in display
sengs.
Steps
1. Click Image → Display
Sengs to enter the display sengs
page.
Figure 7-12 Display Sengs
2. Select the Format.
3. Set the display parameters.
WDR
Wide Dynamic Range can be used when there is a high
contrast of the bright area and the dark area of the scene.
Brightness
Brightness describes bright of the image, which ranges from
1 to 100.
Contrast
Contrast describes the contrast of the image, which ranges
from 1 to 100.
Saturaon
Saturaon describes the colorfulness of the image color,
which ranges from 1 to 100.
Sharpness
Sharpness describes the edge contrast of the image, which
ranges from 1 to 100.
4. Set the Day/Night Mode.
65

HIKVISION DS-KD8003-IME2 Specifications

General

Megapixel	2 MP
Maximum frame rate	30 fps
Supported video modes	720p, 1080p
Viewing angle, vertical	96 °
Maximum video resolution	1920 x 1080 pixels
Viewing angle, horizontal	180 °
Video codecs	H.264
Number of buttons	1 buttons
Streaming capability	Yes
Connectivity technology	Wired
Maximum number of cameras supported	-
Voice codecs	G.711u
Product color	Black, Grey
International Protection (IP) code	IP65
Operating relative humidity (H-H)	10 - 95 %
Door station operating temperature (T-T)	-40 - 60 °C
Indoor unit included	No
Outdoor unit power type	DC
Display diagonal	- \
Harmonized System (HS) code	85176920