HIKVISION DS-KD8003-IME2 - Device Activation and Configuration; Device Activation and Network Parameters

Figure 4-49 Connect the Grounding Line to the Cover
11. Fix the cover with 2 socket head cap screws by using a
hexagon wrench (supplied).
Figure 4-50 Fix the Cover
5 Acvaon
5.1 Acvate Device via Client Soware
You can only congure and operate the door staon aer creang
a password for the device acvaon.
Default parameters of door staon are as follows:
●
Default IP Address: 192.0.0.65.
●
Default Port No.: 8000.
●
Default User Name: admin.
Steps
1. Run the client
soware, click Maintenance and Management
→ Device Management → Device to enter the page.
2. Click Online Device.
3. Select an inacvated device and click Acvate.
4. Create a password, and conrm the password.
34