HIKVISION DS-KD8003-IME2 User Manual

Click User Management to enter the sengs page.
Administrator can edit the permission for the users.
Note
We highly recommend you to create a strong password of your
own choosing (using a minimum of 8 characters, including at least
three kinds of following categories: upper case leers, lower case
leers, numbers, and special characters) in order to increase the
security of your product. And we recommend you change your
password regularly, especially in the high security system,
changing the password monthly or weekly can
beer protect
your product.
Online Users
Click User Management → Online Users to enter the page.
Figure 6-5 Online Users
Click Refresh to get the present informaon.
Arming/Disarming
Informaon
Click User Management → Arming/Disarming Informaon to
view the informaon. Click Refresh to get the present
informaon.
6.4.3 Network
Sengs
TCP/IP Sengs
TCP/IP sengs must be properly congured before you operate
the device over network. The device supports IPv4.
Steps
1. Click Network → Basic
Sengs → TCP/IP to enter the sengs
page.
40

HIKVISION DS-KD8003-IME2 Specifications

General

Megapixel	2 MP
Maximum frame rate	30 fps
Supported video modes	720p, 1080p
Viewing angle, vertical	96 °
Maximum video resolution	1920 x 1080 pixels
Viewing angle, horizontal	180 °
Video codecs	H.264
Number of buttons	1 buttons
Streaming capability	Yes
Connectivity technology	Wired
Maximum number of cameras supported	-
Voice codecs	G.711u
Product color	Black, Grey
International Protection (IP) code	IP65
Operating relative humidity (H-H)	10 - 95 %
Door station operating temperature (T-T)	-40 - 60 °C
Indoor unit included	No
Outdoor unit power type	DC
Display diagonal	- \
Harmonized System (HS) code	85176920