Note
We highly recommend you to create a strong password of your
own choosing (using a minimum of 8 characters, including at
least three kinds of following categories: upper case leers,
lower case leers, numbers, and special characters) in order to
increase the security of your product. And we recommend you
change your password regularly, especially in the high security
system, changing the password monthly or weekly can
beer
protect your product.
5. Click OK to acvate the device.
Note
●
When the device is not acvated, the basic operaon and
remote operaon of device cannot be performed.
●
You can hold the Ctrl or Shi key to select mulple devices in
the online devices, and click the Acvate buon to acvate
devices in batch.
5.2 Edit Network Parameters
To operate and congure the device via LAN (Local Area
Network), you need connect the device in the same subnet with
your PC. You can edit network parameters via iVMS-4200 client
soware.
Steps
1. Select an online
acvated device and click the Modify Nenfo.
2. Edit the device IP address and gateway address to the same
subnet with your computer.
3. Enter the password and click OK to save the network
parameters
modicaon.
Note
●
The default port No. is 8000.
●
The default IP address of the door staon is 192.0.0.65.
●
Aer eding the network parameters of device, you should
add the devices to the device list again.
6 Remote Conguraon via Web
6.1 Live View
In the browser address bar, enter the IP address of the device,
and press the Enter key to enter the login page.
Enter the user name and password and click Login to enter the
Live View page. Or you can click Live View to enter the page.
35
To Next Page
Loading...
Need help?
General
