2) You can click Download Template for Imporng Person to
download the template rst.
3) Input the person informaon to the downloaded template.
4) Click ... to select the Excel le with person informaon.
5) Click OK to start imporng.
7.5.4 Get Person Informaon from Device
If the added device has been congured with person informaon
(including person details, ngerprint, issued card informaon),
you can get the person informaon from the device and import to
the client for further operaon.
Steps
Note
This funcon is only supported by the device the connecon
mothod of which is TCP/IP when adding the device.
1. In the organizaon list on the le, click to select an
organizaon to import the persons.
2. Click Get from Device to pop up the dialog box.
3. The added device will be displayed.
4. Click to select the device and then click Get to start geng the
person informaon from the device.
Note
●
The person informaon, including person details, person's
ngerprint informaon (if congured), and the linked card (if
congured), will be imported to the selected organizaon.
●
If the person name stored in the device is empty, the person
name will be
lled with the issued card No. aer imporng
to the client.
7.5.5 Change Person to Other Organizaon
You can move the person to another organizaon if needed.
Steps
1. Select the person in the list and click Change
Organizaon.
2. Select the organizaon to move the person to.
3. Click OK to save the sengs.
7.5.6 Issue Card in Batch
You can issue mulple cards for the person with no card issued in
batch.
Steps
1. Click Batch Issue Cards to enter the dialog page. All the added
person with no card issued will display in the Person(s) with No
Card Issued list.
76
To Next Page
Loading...
Need help?
General
